From 4b88257ee1044ff7d4cb73cc6bdb40d36d8e6b07 Mon Sep 17 00:00:00 2001
From: master_roby3 <master.roby3@proton.me>
Date: Tue, 19 Sep 2023 09:14:56 +0000
Subject: [PATCH] Upload files to "Receiver-Arduino"

---
 Receiver-Arduino/producer.ino        |  17 +++++
 Receiver-Arduino/receiver_serial.cxx | 103 +++++++++++++++++++++++++++
 2 files changed, 120 insertions(+)
 create mode 100644 Receiver-Arduino/producer.ino
 create mode 100644 Receiver-Arduino/receiver_serial.cxx

diff --git a/Receiver-Arduino/producer.ino b/Receiver-Arduino/producer.ino
new file mode 100644
index 0000000..a74b370
--- /dev/null
+++ b/Receiver-Arduino/producer.ino
@@ -0,0 +1,17 @@
+void setup() {
+  // put your setup code here, to run once:
+  Serial.begin(9600);
+
+}
+
+void loop() {
+  // put your main code here, to run repeatedly:
+  uint32_t w = 0xCAFE0000;
+
+  w |= random(100);
+
+  Serial.write( (char*) &w, 4);
+  
+  delay(1000);
+
+}
diff --git a/Receiver-Arduino/receiver_serial.cxx b/Receiver-Arduino/receiver_serial.cxx
new file mode 100644
index 0000000..1fbbbc0
--- /dev/null
+++ b/Receiver-Arduino/receiver_serial.cxx
@@ -0,0 +1,103 @@
+#include <stdio.h>
+#include <stdlib.h>
+#include <linux/ioctl.h>
+#include <fcntl.h>
+#include <termios.h>
+#include <unistd.h>
+#include <signal.h>
+
+#include <inttypes.h>
+#include <fstream>
+
+
+int openSerialPort(char* portname, int readMin=16){
+    /* Open the file descriptor in non-blocking mode */
+    int fd = open(portname, O_RDWR | O_NOCTTY);
+    if(fd==-1){
+        printf("Error trying to open the file: %s\n", portname);
+        return 1;
+    }
+    /* Set up the control structure */
+    struct termios toptions;
+    /* Get currently set options for the tty */
+    tcgetattr(fd, &toptions);
+    /* -----------  Set custom options ------------*/
+    /* 9600 baud */
+    cfsetispeed(&toptions, B9600);
+    cfsetospeed(&toptions, B9600);
+    /* 8 bits, no parity, no stop bits */
+    toptions.c_cflag &= ~PARENB;
+    toptions.c_cflag &= ~CSTOPB;
+    toptions.c_cflag &= ~CSIZE;
+    toptions.c_cflag |= CS8;
+    /* no hardware flow control */
+    toptions.c_cflag &= ~CRTSCTS;
+    /* enable receiver, ignore status lines */
+    toptions.c_cflag |= CREAD | CLOCAL;
+    /* disable input/output flow control, disable restart chars */
+    toptions.c_iflag &= ~(IXON | IXOFF | IXANY);
+    /* disable canonical input, disable echo, disable visually erase
+     * chars disable terminal-generated signals */
+    toptions.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG);
+    /* disable output processing */
+    toptions.c_oflag &= ~OPOST;
+    /* wait for readMin characters to come in before read returns */
+    /* WARNING! THIS CAUSES THE read() TO BLOCK UNTIL ALL */
+    /* CHARACTERS HAVE COME IN! */
+    toptions.c_cc[VMIN] = readMin;
+    /* no minimum time to wait before read returns */
+    toptions.c_cc[VTIME] = 0;
+    /* commit the options */
+    tcsetattr(fd, TCSANOW, &toptions);
+    /* Wait for the Arduino to reset */
+    usleep(1000*1000);
+    /* Flush anything already in the serial buffer */
+    tcflush(fd, TCIFLUSH);
+    printf("Ready to receive the words \n");
+    return fd;
+}
+
+void usage(){
+    printf("Read in loop a 32 bit word \n");
+    printf("I.e. it assumes that Arduino sends a 32 bit word for each readout\n");
+    printf("Usage: command portName \n");
+    exit(2);
+}
+
+void* out_stream;
+
+void term_handler(int signal_num){
+    std::ofstream* out = static_cast<std::ofstream *>(out_stream);
+    //std::ofstream out = *out_point;
+    out -> flush();
+    out -> close();
+    exit(0);
+
+}
+
+int main(int argc, char *argv[]){
+    signal(SIGTERM, term_handler);
+
+    if(argc!=2)
+        usage();
+ 
+    // Set the port name
+    char* portName = argv[1];
+    
+    int fd = openSerialPort(portName);
+
+    std::ofstream out("file.dat", std::ios::binary);
+
+    out_stream = &out;
+
+    for(;;){
+        uint32_t w = 0x0;
+        int n = read(fd, (char*) &w, 4);
+        printf("Got %d bytes, 0X%8x \n", n, w);
+        out.write ((char*) &w, sizeof(w));
+    }
+
+    out.close();
+
+    return 0;
+}
\ No newline at end of file